Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.
The KAC-9106D mono amp puts out up to 1,000 watts RMS to your subwoofer. Onboard low-pass and subsonic filters let you adjust the signal so you'll get the best sound possible from your subwoofer/box combo. You can dial in up to 18 dB of bass boost if you want to really fatten up the sound.
This versatile amp features speaker-level inputs and signal sensing turn-on, so you can put this amp to work in just about any kind of system. Aluminum cover plates cover and protect the amp's connections and controls, giving your installation a neat, professional look.
Circuito de amplificación de clase D
Activación por detección de señal
Potencia de salida máxima 2000 Watts
Capacidad de carga 2Ω
Nuevo sistema de ventilación
Filtro pasa bajo incorporado
Filtro de infrasonidos incorporado
Función Bass Boost
Signal to Noise Ratio: 100 dB1
Low Pass Filter: 50 - 200 Hz (-24 dB / oct.)1
Infrasonic Filter: 20 - 50 Hz (-24 dB / oct.)1
Bass Boost: 40 Hz (0 - +18 dB)1
Size(inch): (W)13-3/16" x (H)2-3/16" x (D)7-9/16"1
Weight(lbs): 6.2
Title Class D Mono Power Amplifier
Amplifier Type Class D
CEA-2006 Primary Ratings Power Output 500Watts RMS x 1 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio 76dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output MAX POWER 2000W
Power Output Rated Power at 14.4V 500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.0% THD)
1000Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.0% THD)
Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20Hz-200Hz (+0dB, -3dB)
Class D
Input Impedance 10k ohm
Speaker Impedance 4Ω (2Ω to 8Ω allowable)
Audio Section
Low-Pass Filter
Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
Infrasonic Filter Built in Variable Infrasonic Filter (20Hz-50Hz, -24dB/oct)
Bass Boost Built in Bass Boost Control (40Hz, 0dB-+18dB)
RCA Input Sensitivity 0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity
4.0[V] - 12.0 [V]
Terminals Battery & Ground Screw Type Terminal Block (Ni) (M6)
Speaker Output Screw Type Terminal Block (Ni) (M4)
Line In RCA (Ni)
Line Out RCA (Ni)
Speaker Input JST Connector
General Dimensions(WxHxD) 335 [mm] x 56 [mm] x 192 [mm]
13-3/16 inch x 2-3/16 inch x 7-9/16 inch
Weight (kg) 2.8 [kg] 6.2 [lbs]
Operating Voltage 14.4V（11-16V allowable） [V]
Current Consumption 65 [A]
Key Features
CEA-2006 Compliant
Class D
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Terminal Cover
Power MOS-FET Switching Power Supply
Cast Aluminum Heat Sink Design
Line Output Terminals for Extension
Others
Triangle Indicator
English
Español
