Kenwood KAC-PS702EX

Title Stereo/Bridgeable Power Amplifier Amplifier Type Class AB Series PERFORMANCE SERIES CEA-2006 Primary Ratings Power Output 70 Watts RMS x 2 at 4 Ohms and ≤1%THD+N Signal-to-Noise Ratio 80dBA (Reference: 1Watt into 4Ohms) Maximum Power Output MAX POWER 500W Power Output Rated Power at 14.4V 70Watts RMS x [ch] (4 Ohms, 20-20k Hz, ≤1.00 % THD) 85 Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00 % THD) 170 Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00 % THD) Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V) Frequency Response 20Hz-50k Hz (+0dB, -3dB) Class AB Input Impedance 10k ohm Speaker Impedance (Bridged connection) 4 Ω ( 2 Ω to 8 Ω allowable) Speaker Impedance (Bridged connection) 4 Ω to 8 Ω allowable Audio Section Low-Pass Filter Built in Low-Pass Filter (80Hz, -18 dB/oct) RCA Input Sensitivity 0.2[V] - 5.0 [V] Speaker Level Input Sensitivity 4.0[V] - 12.0 [V] Terminals Battery & Ground Screw Type Terminal Block (Nickel colored) (M4) Speaker Output Screw Type Terminal Block (Nickel colored) (M4) Line In RCA (Nickel colored) Speaker Input Connector (Balance) General Dimensions(WxHxD) 230 [mm] x 56 [mm] x 167 [mm] 9-1/16 inch x 2-3/16 inch x 6-9/16 inch Weight (kg) 1.4 [kg] 3.1 [lbs] Operating Voltage 14.4V ( 11.0 - 16.0 V allowable) Current Consumption 15 [A] Key Features CTA-2006 Compliant 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design Others Triangle Indicator